Students


Staff

Home > Programs > Course List Details

Electromechanical Technology Courses


Take the following course(s):

PEI Occupational Health and Safety

An overview of the Occupational Health and Safety Act of Prince Edward Island. Students examine the legislation, how PEI employees are protected while on the job and the responsibilities of employees and employers.

Hours: 0
Course Code: SAFE-1005



Programmable Logic Controls I

In this course students learn the knowledge and skills necessary to understand what a Programmable Logic Control (PLC) is, some of what it can do, and how to perform basic programming and troubleshooting.

Hours: 30
Course Code: ATMN-2100



Programmable Logic Controls II

This course builds on the foundation set in Programmable Logic Controls I, allowing students to expand their knowledge of programmable controllers and programming. Students learn the graphical programming languages Function Block Diagram (FBD) and Sequential Function Chart (SFC) and construct programs using subroutines.

Hours: 60
Course Code: ATMN-2110



Instrumentation and Motion Control

Process control and servo (motion) control are two branches of control engineering that use automation to produce a product. Students learn about the components, circuits, instruments, and control techniques used in these two branches of industrial automation. Theory is reinforced through lab activities and projects.

Hours: 90
Course Code: ATMN-2120



Industrial Communication Systems

This course provides students with an overview of the control and information networks used today in many industrial plants and factories. Students examine the Open System Interconnection (OSI) model, protocols, Ethernet local-area networks (LANs), and networking devices. Students examine premise cabling options and prepare and test cables, as well as install, configure, and troubleshoot network components.

Hours: 45
Course Code: ATMN-2130



Mechatronics

Mechatronics is a discipline that combines mechanical systems, electronic systems, control systems, and computers. This course involves the installation and set up of mechanical components, pneumatic components, electrical components, and sensors. The programming and application of a programmable logic device (PLC) is used to control processes.

Hours: 90
Course Code: ATMN-2140



Electrical Blueprint Reading

The ability to read and understand blueprints is essential in the construction field, as blueprints are used to design, plan, estimate and build projects. This course introduces students to blueprint reading and sketching, with a focus on engineered drawings for residential and commercial types of structures.

Hours: 45
Course Code: BLPR-1010



Introduction to Computer Aided Design

This course is an introduction to basic terminology, concepts and functions of AutoCAD software. Students acquire the skills and knowledge to produce technical drawings using this software, and also set up and manage an electronic filing system for drawing storage and archiving. Additionally, students acquire the skills to specify hardware and peripheral equipment required to operate the software and generate drawings.

Hours: 45
Course Code: CADD-1015



Workplace Communications

This course is designed to allow students to develop preparatory skills for securing and retaining employment including; workplace communication, time management, critical thinking and problem-solving, and customer service. Upon successful completion of this course students are able to use oral communications techniques, and create a variety of written documents and reports used in the workplace. Methods and strategies for job search, preparation and retention are also incorporated.

Hours: 45
Course Code: COMM-1005



Workplace Communications II

This course is a combination of the oral and written communication skills that are required for the transition from school to the workplace. Included in the formal technical writing is business correspondence, informal and formal report writing, proper citation techniques, and report formatting. Oral presentation skills, including utilizing technology, and job search and interview techniques, are also covered.

Hours: 30
Course Code: COMM-2005



Computer Essentials

In this course, students are introduced to the fundamentals of various software programs and information processing systems used in today's workplace and educational environments. Students develop the skills necessary to understand and efficiently use common workplace productivity tools. The main areas of focus include: operating systems, e-mail and groupware, word processing, spreadsheets, electronic presentation software, and the integration of these technologies.

Hours: 45
Course Code: COMP-1000



Occupational Safety and Canadian Electrical Code

Students learn safe working practices and measures to ensure both personal and public safety as it pertains to the electrical trade. Students also learn about the Canadian Electrical Code (CEC), how to utilize this standard, and how it applies to electrical installations that they will encounter in the program, and throughout their careers.

Hours: 60
Course Code: ELEC-1001



Electrical Fundamentals

Study of electricity, passive direct current (DC) circuits, and passive alternating current (AC) circuits. Learners analyze DC and AC circuits; select and test passive components; measure electrical quantities using appropriate test equipment. Construction and troubleshooting techniques for circuits are introduced.

Hours: 90
Course Code: ELEC-1015



Wiring Methods I

In this course students learn the practical skills required for residential installations. Students become more familiar with the Canadian Electrical Code (CEC) by ensuring that all installations are in compliance.

Hours: 60
Course Code: ELEC-1040



Wiring Methods II

In this course students learn the practical skills required to perform commercial/industrial installations. The course focusses on the proper selection and installation of conduit, tubing and cables and the wiring methods employed with this type of installation. Compliance with the Canadian Electrical Code (CEC) is stressed for all installations.

Hours: 60
Course Code: ELEC-1045



Three-Phase Circuits

This course introduces the theory of three-phase circuits and systems and their use in commercial and industrial wiring. The advantages of using three-phase circuits is that motors, generators and transformers are cheaper and more efficient, three-phase transmission lines can deliver more power for a given weight and cost, and the voltage regulation of a three transmission system is superior to that of a single-phase circuit. The course has a lab component to aid in reinforcement of theory.

Hours: 45
Course Code: ELEC-1053



Transformers

This course covers single-phase and three-phase transformers. A transformer is an AC machine that transfers energy from one circuit to another circuit. They are sometimes called voltage changers. This course has a lab component to aid in reinforcement of theory. The Canadian Electrical Code is applied in this course for the sizing of conductors and overcurrent devices used in transformer circuits.

Hours: 45
Course Code: ELEC-1150



Introduction to Rotating Electrical Machines and Controls

This course introduces the theory of DC and AC rotating machines and their basic control, with focus on the proper identification of the machine as well as the wiring connections and control methods. As part of this course, students are given the opportunity to demonstrate motor wiring skills in a practical workshop environment.

Hours: 90
Course Code: ELEC-1160



Electronic Devices

Electronic devices are the fundamental building blocks from which all useful electronic equipment is constructed. This course covers the theory and operation of electronic devices and circuits. Diodes, Bipolar Junction Transistors, Operational Amplifiers, Thyristors, and Photoelectric devices are studied.

Hours: 60
Course Code: ELEC-2100



Digital Logic Circuits

Digital Technology forms the foundation for computers, automobile electronics, industrial control systems, consumer electronics, wireless communication, television and radio. This course covers the core fundamentals of digital technology. Topics explored include logic gates, adders, encoders, decoders, comparators, multiplexers, demultiplexers, latches, flip-flops, timers, counters, shift registers and data conversion. Theory is reinforced through lab activities and projects.

Hours: 60
Course Code: ELEC-2110



Rotating Electrical Machines and Controls II

This course builds on the knowledge and skills developed in the Introduction to Electrical Rotating Machines and Controls course. Advanced motor control methods will be introduced including Variable Frequency Drives, Servo Motor control, Timers, Detection Sensors, and Motor Control Centers. There is a significant component of wiring advanced control schematics into real world scenarios. The course primarily lab based.

Hours: 90
Course Code: ELEC-2130



Fluid Power Systems

Fluid power systems are used on most industrial sites to transfer power and to control processes. The course examines both hydraulic and pneumatic systems and the laws relating to pressure, force, volume and flow. The study and application of control valves, pressure regulators, actuators, filters and auxiliary components are covered, and theory is reinforced through lab work that involves design, testing and troubleshooting of circuits.

Hours: 75
Course Code: FLUD-2000



MacHining Operations

This course gives students a basic understanding of the function and operation of common machine shop equipment. The machine theory is reinforced as students build projects using lathes, milling machines, drills, saws and punches.

Hours: 60
Course Code: MACH-2000



Technical Mathematics I

This course is designed to enable the student to develop technician level math skills. Students will acquire competency in the math skills as they relate to their energy systems engineering technology program and future career. Emphasis will be placed on developing problem solving and critical thinking skills that the student will use in troubleshooting. Students will be challenged to continually make connections between math and their main program, as well as every day applications.

Hours: 60
Course Code: MATH-1100



Technical Mathematics II

Building on the outcomes from Technical Mathematics I, students explore exponential and logarithmic equations, statistical calculations, and learn to perform calculations involving decibels as it relates to power. Students also learn to work with various number systems that they will encounter during their program and throughout their careers. Emphasis is placed on problem-solving and critical thinking skills that are used in troubleshooting.

Hours: 30
Course Code: MATH-1170



Industrial Mechanics I

This course begins the study of industrial mechanics and systems. Students learn how to select, install, adjust, troubleshoot and repair belt, chain, and coupling drive systems. Theory is reinforced through lab activities.

Hours: 75
Course Code: MECH-1000



Industrial Mechanics II

This course explores lubrication concepts, plain bearings, ball bearings, roller bearings, and gear drives. Laser shaft alignment and vibration analysis are also covered. Lab activities are used to reinforce the theory.

Hours: 75
Course Code: MECH-2000



Standard First Aid and CPR/AED Level C

A comprehensive two-day course offering standard first aid and cardiopulmonary resuscitation (CPR) skills from a certified trainer. As required by regulation, this course covers CPR and the management of other breathing, airway and circulation emergencies, as well as, the control of bleeding, treating shock, stabilizing fractures and dislocations, head and spine injuries, and more. Also, includes automated external defibrilators (AED). This certification expires in 3 years.

Hours: 12
Course Code: NCPR-1001



Workplace Hazardous Materials Information Systems

Students complete Workplace Hazardous Materials Information System (WHMIS) training and certification.

Hours: 3
Course Code: NCPR-1002



Physics

This course is designed to introduce students to mechanical physics. Topics in this course include kinematics, statics, energy, states of matter and waves. Emphasis is placed on developing problem-solving and critical thinking skills as the students relate the physics' concepts to their program of study and their future career.

Hours: 45
Course Code: PHYS-1000



Cutting and Welding

In this course, students acquire the theory and practical skills necessary to perform basic welding and cutting operations. Students gain experience performing basic oxyacetylene cutting and welding, and electric arc welding.

Hours: 30
Course Code: WELD-2290